Toshiba RB-RWS21-E - Special Button Operations; Press & Hold 4 Seconds Function; Clock Display Format

–28–
EN
Installation Manual
5. Setting louver position
The louver indication setting can be changed.
1 Push the [ ∧ ] / [ ∨ ] button to select
“5. Setting louver position”, then push the
“ Set” [
F2] button.
“Impossible” is displayed in the case of a model
for which the wind direction cannot be set.

 is displayed for the selected item.
2 Push the [ ∧ ] / [ ∨ ] button to select
an item on the “Fixed position indication”
screen.
The highlighted item can be set.
Move ○ with the “ ←” [ F1] /
“
→” [ F2] button to set the
setting.
3 After setting each item, push the [ MENU]
button to confirm the changes to the
settings.
Change the flap position indication for when swinging is cancelled in [Fixed position
indicator].
When “ON” is selected, the louver stops and the indication becomes as shown on the right
when swinging is cancelled.
(Factory default)
When “OFF” is selected, the stop position and indication becomes as shown on the right
after swinging is cancelled.
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Field setting menu
(
1/2
)
Return
Set
ON / OFF
Setting louver position
Return Fix
1.Fixed position indication
Set