Toshiba RB-RWS21-E - Occupancy Sensor; Sensor Operation Settings

–29–
Owner’s Manual
 Press & hold 4 sec.
Set the “press and hold” operation for the [ ON / OFF] button.
 Clock display
Select the “12-hour clock” and “24-hour clock”.
NOTE
• Even if you select the “12-hour clock”, the “24-hour clock” display will still appear in the setting screen of the schedule
timer etc.
1 Push the [ ∧] / [ ∨] button to select
“8.Press & hold 4 sec.” on the menu screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧] / [ ∨] button to select
“ON” or “OFF”.
3 Push the [ MENU] button.
When “ON” is selected, the air-conditioner
starts / stops running when the [ ON / OFF]
button is pressed and hold 4 seconds.
When “OFF” is selected, the air-conditioner
starts / stops running when the [ ON / OFF]
button is pressed.
The factory default is “OFF”.
1 Push the [ ∧] / [ ∨] button to select
“9. Clock display” on the menu screen, then
push the “ Set”
[ F2] button.
2 Push the [ ∧] / [ ∨] button to select
“24H” or “AM/PM”.
24H: 24-hour clock
AM/PM: 12-hour clock
3 Push the [ MENU] button.
The screen returns to the “Initial setting” screen.
Initial setting(2/2)
6.Header/Follower
7.Language
8.Press & hold 4 sec.
9.Clock display
Set
Return
Set
Press & hold 4 sec.
ON
OFF
Return Fix
Initial setting(2/2)
6.Header/Follower
7.Language
8.Press & hold 4 sec.
9.Clock display
Set
Return
Clock display
24H
AM/PM
Return Fix
Set