– 24 –
Lite-Vision plus Remote Controller
Installation Manual
EN
Selecting the model name and serial No.
2 Push the [ ∧ ] / [ ∨ ] button to select
“1. Manual model name input” on the
“
Outdoor model name” screen, then push
the “ Set” [
F2] button.
ÆSelect “1. Manual serial No. input” to enter the
serial number of the outdoor unit.
ÆSe
lect “1. Manual model name input” to enter
the model name of the indoor unit.
ÆSe
lect “1. Manual serial No. input” to enter the
serial number of the indoor unit.
3 Enter the model name of the outdoor unit.
ÆSee page 13 about how to enter the model
name and serial number.
4 Select “Remote controller” for the display
mode of model name or serial number to
display the manually entered model name or
serial number. (See page 13.)
1 Push the [ ∧ ] / [ ∨ ] button to select
“2. Model name selection” on the “Outdoor
model
name” screen, then push the
“ Set” [
F2] button.
ÆTo select the serial number of the outdoor unit,
select "2.Serial No. selection".
ÆTo select t
he model name of the indoor unit,
select "2. Model name selection".
ÆTo select t
he serial number of the indoor unit,
select "2.Serial No. selection".
2 Push the [ ∧ ] / [ ∨ ] button to select
“Remote controller” or “Outdoor unit”.
ÆWhen "Outdoor unit" or "Indoor unit" is selected,
the model name or serial number received from
the outdoor or indoor unit is displayed.
ÆW
hen "Remote controller" is selected, the
manually entered model name or serial number
is displayed.
ÆThe
factory default is "Outdoor unit" or "Indoor
unit".
3 Push the [ MENU] button.
ÆThe screen returns to the “Outdoor model
name” screen.
1.Manual model name input
2.Model name selection
Outdoor model name
Outdoor model name
Return
Set
Fix
Set
Return Set
Fix
Del
A BCDE
FGH I J
KLMNO
PQRST
UWXY
Z&/:·
abcde
fghij
klmno
pqrst
uvwxy
z–+!?
12345
67890
1.Manual model name input
2.Model name selection
Outdoor model name
RAV-SP1104AT8-E
Outdoor model name
Return
Set
Fix
Set
Model name selection
Remote controller
Outdoor unit
Return Fix
+00EH97062701_00EN.book Page 24 Thursday, March 17, 2011 5:29 PM