Toshiba RBC-AWSU52-UL - Basic Operations; Starting and Stopping Air Conditioner; Adjusting Set Temperature

–11–
Owner’s Manual
5 Basic operations
Air conditioner
■
Operations
■ Changing the set temperature
NOTE
• For the range of temperatures that can be set, refer to <Set temp. range limit>. (Page 41)
• The temperature setting cannot be changed when “Fan” is set.
• If the operation mode is set to “Auto” and dual set point is set, refer to <Individual temperature settings for “Cool” and “Heat” in
auto operation modes (dual set point)>. (Page 56)
1 Press [ ON/OFF] to start operations
 The operation LED lights.
2 Press [ ] and [ ] to select the item you
want to change
 You can change the following items.
Setting temperatures (Page 11)
Operation mode (Page 12)
Fan speed (Page 12)
Wind direction (Page 13)
3 To stop operations, press [ ON/OFF]
again
1 Press [ ] and [ ] to switch to the “Set
temp.” screen
2 Press [ ] and [ ] to change the
temperature setting
 Press [ ] to increase and press [ ] to decrease
the set temperature.