–20–
Owner’s Manual
EN
■1. Individual louver (Select wind direction for each air outlet)
You can set the wind direction for each outlet of indoor units that have 4-way air discharge.
• This function may not be available, depending on the model of the indoor unit.
• This function can only be set while the air conditioner is operating.
• For models that “Individual louver” is not available, the message “No function” is displayed.
• Press [ ] or [ ] while swinging to stop the louvre and cancel swinging, press [ ] or [ ] again to select an wind
direction.
• For group connections, refer to <When multiple indoor units are connected as a group (group connection)>. (Page 57)
• “ ” is displayed when “Louver lock” is set. That louvre cannot do “Individual louver”. (Page 22)
1 In “Menu” (Page 17), select “Individual
louver”, and press [ Set/Fix]
2 Press [ ] and [ ] to select louvres
3 Press [ ] and [ ] to select wind
direction
For details, refer to <Changing the wind direction>.
(Page 13)
4 Press [ Return]
Return to “Menu”.
▼
4-way air discharge type
▼
Compact 4-way air discharge type
Louvre 1
Louvre 2
Louvre 3
Louvre 4
All louvres
Electrical control
box
Refrigerant
pipe
Drain pipe
Receiver
installation
position
Electrical control
box
Drain pipe
Refrigerant pipe
Receiver
installation
position
To Next Page
Loading...
