– 22 –
Part Name
A: PROGRAM button Use to start setting programs and to enter program settings.
B: PROG. COPY buttons Use to copy programs to specific days in a schedule.
The button is not used.
C: CLEAR button
Press to clear the settings of the currently displayed program.
• The current program is not cleared unless the button is pressed
after pressing the CLEAR button.
D: Setting buttons Us
e to make program settings and to set the present time.
Press to set groups for programmed operation.
Press to set today’s day and days of programmed operation.
Press to set the present time and times used in programmed operation.
Use to start/stop indoor units via the timer.
Not used.
Use to set programmed operation trigger time.
• Program settings a
re not entered unless the button is pressed at
the end of setting operations.
E: HOLIDAY button Press to set and cancel holidays during a scheduled week of operation.
F: CANCEL button Press to cancel the current program setting operation, copying operation or
holiday setting operation. When the CANCEL button is held down for 2
seconds, the current setting operation or copying operation is canceled and
the normal display returns.
G: TIMER OFF button Press to turn the timer OFF when timer operation will not be used for a long
period of time. When this button is held down for 2 seconds,
appears on the display. Programs cannot be run until the button is again held
down for 2 seconds.
• Some of these buttons are disabled when SDI/DI is used with the schedule
timer in the conventional weekly timer mode. If any of the disabled buttons is
pressed, appears on the display. For more information, contact your dealer.
A: PROGRAM button
B: PROG. COPY buttons
C: CLEAR button
D: Setting buttons
G:TIMER OFF button
F: CANCEL button
E: HOLIDAY button
To Next Page
Loading...
