To Next PageTo Next Page
Need help?Do you have a question about the Toshiba Regza 40RF350U and is the answer not in the manual?
General| Screen Size | 40 inches |
|---|---|
| Display Technology | LCD |
| Refresh Rate | 60 Hz |
| Backlight Type | LED |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Weight | 22.5 lbs |
| Resolution | 1920 x 1080 (1080p) |
| Built-in Tuner | ATSC |
Covers warnings about electric shock, moisture, covers, and proper installation.
Covers reading instructions, keeping them, warnings, water, cleaning, ventilation, heat, and plugs.
Covers cord protection, outlet overloading, grounding, and lightning safety.
Details using correct furniture and securing the TV to prevent tip-overs.
Dangers related to power lines, screen striking, and liquid contact.
Covers hazards of unstable placement and ventilation requirements.
Critical warnings about TV placement and ventilation.
Advises unplugging before cleaning and proper screen cleaning methods.
Warns against self-servicing and informs about mercury in LCD lamps.
Provides precautions for pedestal stand setup.
Advises using UL-listed brackets for wall mounting.
Provides a step-by-step guide for TV installation and initial use.
Identifies and explains front and side panel controls and connections.
Identifies and explains rear panel connections.
Details connecting a VCR without a cable box to antenna/cable.
Details connecting a VCR with S-video and a cable box.
Details connecting multiple devices using component video.
Details connecting a camcorder using A/V cables.
Details connecting HDMI or DVI devices to the TV.
Details connecting a digital audio system via optical out.
Details connecting a PC via PC IN or HDMI terminals.
Details connecting an analog audio system for volume adjustment.
Explains how to install batteries in the remote control.
Explains the functions of various remote control buttons.
Details remote key functions for different modes.
Continues the chart detailing remote key functions for different modes.
Explains how the remote controls other devices.
Explains how to find device codes for remote programming.
Details the process of programming the remote for external devices.
Provides an overview of the TV's main menu structure and options.
Details the layout of the Setup and Installation menus.
Explains how to use the remote/panel to navigate TV menus.
Explains how channels are stored and tuned.
Explains enabling automatic input switching via mode select buttons.
Explains how to configure audio settings for HDMI inputs.
Explains how to set ANT input source to Cable or Antenna.
Details the automatic channel scan and storage process.
Explains how to switch between different video inputs.
Introduces channel tuning methods.
Explains how to choose different picture display sizes.
Details how to adjust contrast, brightness, color, etc.
Explains how to enable and use closed captions.
Explains how to block programs based on V-Chip ratings.
Explains how to block specific TV channels.
Explains how to choose predefined picture quality modes.
