Toshiba REGZA RL83 Digital Series - Resetting the Advanced Picture Settings; Expert Picture Settings

28
CONTROLS AND FEATURES
English
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a In the Advanced Picture Settings menu, press b to
select Reset.
b Press OK.
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a In the Picture menu, press B or b to select Expert
Picture Settings, and then press OK to display
Expert Picture Settings menu.
b Press B or b to select Test Pattern.
c Press C or c to select On.
d Press EXIT to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more
accurate adjustment of each colour.
a In the Expert Picture Settings menu, press B or b to
select RGB Filter, and then press OK.
b Press B or b to select Red, Green or Blue to adjust.
c Press C or c to select On.
d Press b to select Colour or Tint, and then press C or
c to adjust.
e Press EXIT.
NOTE: It is not possible to turn off all three colours
simultaneously.
White Balance-Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
a In the Expert Picture Settings menu, press B or b to
select White Balance, and then press OK.
b Press B or b to select Window Display and press C
or
c to select On.
c Press EXIT to close.
White Balance-Setting Type
You can choose from two types of White Balance adjustment.
a In the Expert Picture Settings menu, press B or b
to select White Balance, and then press OK.
b Press B or b to select Setting Type and press C or c
to select 2P or 10P.
White Balance-2P White Balance
a Press b to select 2P White Balance.
b Press B or b to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or Blue-Gain.
c Press C or c to adjust.
White Balance-10P White Balance
a Press b to select 10P White Balance.
b Press B or b to select IRE, Red, Green, or Blue.
c Press C or c to adjust.
NOTE: The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)
Resetting the advanced picture settings
Expert Picture Settings