43
CONTROLS AND FEATURES
English
Manual Start:
a Insert USB device into the USB socket on the left side
of the TV.
b In the APPLICATIONS menu, select Media Player,
and press OK.
c Press B or b to select Photo, Movie or Music and
press OK. The thumbnail will appear.
To select a file in the list of contents:
a Press B b (C c) to select a file or folder.
b Press OK to move to the next layer, or press RETURN
to return to the previous layer.
To close the Media Player:
a Press EXIT.
Using the Media Player with a DLNA CERTIFIED™
Server
You need to configure a home network before using
this feature (see page 11).
a In the APPLICATIONS menu, highlight Media Player,
and then press OK.
b Press B or b to select Photo, Movie, or Music and
press OK. The thumbnail (for Photo) or list of files (for
Movie and Music) will appear.
NOTE: If there is more than one media server on the
network, a list of all media servers will be displayed.
Highlight the server you want to use, and press OK.
c Press B or b to select a DMS if the selection window
is displayed.
To select a file in the list of contents:
a Press B or b to select a file or folder.
b Press OK to move to the next layer, or press RETURN
to return to the previous layer.
To close the Media Player:
a Press EXIT.
To display the device information
a Press QUICK to open the Quick Menu in list mode or
Multi View mode.
b Press B or b to select Device Information.
Setting DLNA CERTIFIED™ Server waking up:
You only need to complete the Media Server Setup if
you wish to use the “Wake-on-LAN” feature.
a In the APPLICATIONS menu, highlight Media Player,
and then press OK.
b Press B or b to highlight Setup, and press OK.
c Press B or b to highlight Media Server Setup, and
press OK. A list of currently available DMSs will
appear.
d Press B or b to select the desired device, and press
OK. A check will appear in the box. To remove the
check, press OK again.
e Press c to highlight Done, and then press OK to save.
NOTE:
• Up to 8 DMSes can be selected.
• Even if the device checked is powered off, it will be
displayed but grayed out in the Select Device window.
When OK is pressed on a highlighted grayed out item, a
confirmation of Wake-on-LAN is displayed. The TV tries to
wake up the DMS if Yes is pressed. The Server will start if it
supports Wake-on-LAN feature.
• When some DMSs are connected, it may take time until the
list is displayed. The list may be refreshed by the following
operation.
- The device selection window is closed once and it is
displayed again.
-The RED button is pressed.
To Next Page
Loading...
