RemotEye 4 User Manual – 90988-007 55
7 OPTIONAL FEATURES SETUP
RADIUS CONFIGURATION
This page allows the administrator to input the RADIUS server parameters. RADIUS is networking protocol that
provides a centralized authentication to use its network service. The RemotEye 4 has the ability to communicate
with a RADIUS server which will determine if the user has access to RemotEye 4 services.
Click on Settings at the top of the webpage, and on the dropdown menu select RADIUS Settings.
Here are the parameters required to enable the Radius feature:
RADIUS UDP Port – This field shows the default UDP port for RADIUS Authentication. (Read-Only)
Primary RADIUS Server – This field allows the administrator to set the IP address of the primary
RADIUS server.
Secondary RADIUS Server – This field allows the administrator to set the IP address of the secondary
RADIUS server, in case the primary server does not respond.
Share Secret of Primary Server – This allows the administrator to input the case-sensitive text sting
(password) into the text field to access the RADIUS server.
Share Secret of Secondary Server – This allows the administrator to input the case-sensitive text sting
(password) into the text field to access the RADIUS server.
Packet Timeout Interval (sec) – User can set the Packet Timeout Interval in seconds.
Packet Retry Times – User can set the packet retry times.
EMAIL NOTIFICATION
This page allows the administrator to set the RemotEye 4 email notification configuration parameters.
Click on Settings at the top of the webpage, and on the dropdown menu select Email Settings.
SMTP Server – This field allows the administrator to set the IP Address or Hostname of a Simple Mail
Transfer Protocol (SMTP) mail server that will be used to send email messages from RemotEye 4. If
entering a Hostname, the Domain Name Server (DNS) IP address is required in the DNS field.
SMTP Port Number – Port for the SMTP Server.
(Authentication – Authentication is now handled automatically between RemotEye and the mail server.
Supported protocols are NTML, CRAM-MD5, and LOGIN.)
User Account –This field allows the administrator to enter User Account login name of the SMTP mail
server.
User Password –This field allows the administrator to enter User Account password of the SMTP mail
server.
Note: Not all SMTP Servers require login name and password. Please check with SMTP administrator.
Sender Email Address - This field will be used as the sender's email address.
DNS IP Address –This field allows the administrator to set the IP address of the network DNS server if a
Hostname is entered for the Mail Server. Otherwise, this field can be 0.0.0.0.
Send Daily Status Report At (HH:MM) – This field allows the administrator to set the time to send a
Daily Status report to the email address recipients that are selected to receive Daily Status Reports. The
time is set in a 24-hour format HH:MM.
Email Receivers
Fill in receivers:
- No. – Recipient’s list number (1-8)
To Next Page
Loading...
