Toshiba RemotEye 4 - RemotEye 4 Console Menu Navigation

RemotEye 4 User Manual – 90988-007 63
9 REMOTEYE 4 CONSOLE MENU NAVIGATION
In cases where the GUI is not available, such as networks that restrict HTTP access, the RemotEye 4 can be
configured via the built-in console menu using a third-party terminal emulation software.
The table below provides an overview of the console menu structure (See Table 9-1). When navigating through
these menus, all alpha-numeric characters are acceptable, and are case-sensitive.
Table 9-1 Console Menu Tree
RemotEye 4 Menu Tree – Console
(1) RemotEye 4
Card Settings
(1) IP, Time, and
System Group
RemotEye 4 Card Version:
v1.0
Ethernet Address :
(1) IPv4 Group
(Default values shown)
(1) IP Address: (Default: 192.168.1.168)
(2) Gateway Address: Default: (192.169.1.1)
(3) Network Subnet:
(Default: 255.255.255.0)
(0) Return to previous menu
(2) IPv6 Group
(1) IP v6 Link Local Address: (Default:
FE80::2E0:D8FF:FEFF:AFE2)
(2) IPv6 Global Address: (Default:
2001:B182::2E0:D8FF:FEFF:A)
(3) IPv6 Prefix Length: (Default: 64)
(4) IPv6 Router Address: (Default:
FE80::218:E7EE:FEF4:BD26)
(0) Return to previous menu
(3) Date and Time Group
(1) System Date (mm/dd/yyyy):
02/12/2014
(2) System Time (hh.mm.ss):
21:56:43
(3) NTP Server:
(4) NTP Time Zone:
(5) Daylight Saving Time Control:
(0) Return to previous menu
(4) System Contact:
(Default: Technical Support Team)
(5) System Name:
(Default: TOSHIBA)
(6) System Location:
(0) Return to Previous
Menu
(2) Network
Control Group
(1) BOOTP/DHCP Control:
Enabled/Disabled
(2) Upgrade Control:
Enabled/Disabled
(3) Ping Control:
Enabled/Disabled
(1) RemotEye 4
Card Settings
(2) Network
Control Group
(4) UPnP Control:
Enabled/Disabled
(CONT)
(CONT)
(5) SNMP Control Group
(1) SNMP Control: Enabled/Disabled
(2) SNMP Port
(0) Return to previous menu