RemotEye 4 User Manual – 90988-007 69
+===================================================================+
| IP, Time and System Group |
| [IPv4 Group] |
+===================================================================+
1. IP Address : 192.168.1.168
2. Gateway Address : 192.168.1.1
3. Network Subnet : 255.255.255.0
0. Return to previous menu
Please Enter Your Choice => 0
Figure 9-4 IPv4 Group Menu
9.2.1.3 IPv6 Group
Main Menu
(1) RemotEye 4 Card Settings
(1) IP, Time and System Group
(2) IPv6 Group
(See Figure 9-5)
The IPv6 Group provides access to the network address setting listed below. The setting may be viewed or changed
from this screen. When using the Dynamic Host Configuration Protocol (DHCP), items 1 will be retrieved
automatically.
1. IPv6 Link-Local Address: (Default: FE80::2E0:D8FF:FEFF:AFE2)
2. IPv6 Global Address: (Default: 2001:B182::2E0:D8FF:FEFF:A)
3. IPv6 Prefix Length: (Default: 64)
4. IPv6 Router Address: (Default: FE80::218:E7EE:FEF4:BD26)
0. Return to previous menu
Press the number of the associated selection and press [Enter].
+===================================================================+
| IP, Time and System Group |
| [IPv6 Group] |
+===================================================================+
1. IPv6 Link Local Address:
2. IPv6 Global Address:
3. IPv6 Prefix Length:
4. IPv6 Router Address:
0. Return to previous menu
Please Enter Your Choice => 0
Figure 9-5 IPv6 Group Menu
9.2.1.4 Date and Time Group
Main Menu
(1) RemotEye 4 Card Settings
(1) IP, Time and System Group
(2) Date and Time Group (See
Figure 9-6
The IPv4 Group provides access to the network address settings listed below. The settings may be viewed o
1. System Date (dd/mm/yyyy): The date and time format is MM/DD/YYYY, and HH:MM:SS respectively.
2. System Time (hh:mm:ss): RemotEye 4 supports the Network Time Protocol (NTP). These two features
enable the UPS to synchronize its date and time with a NTP server.
3. NTP Server
4. NTP Time Zone : 27
5. Daylight Saving Time Control : Disabled
0. Return to previous menu
Press the number of the associated selection and press [Enter].
To Next Page
Loading...
