Toshiba RemotEye 4 - Figure 9-7 Network Control Group Menu; Figure 9-8 SNMP Control Group

RemotEye 4 User Manual – 90988-007 71
Press the number of the associated selection and press [Enter].
+===================================================================+
| Toshiba RemotEye 4 Configuration Utility |
| [Network Control Group] |
+===================================================================+
1. BOOTP/DHCP Control : Enabled/Disabled
2. Upgrade Control : Enabled/Disabled
3. Ping Control : Enabled/Disabled
4. UPnP Control : Enabled/Disabled
5. SNMP Control Group
6. SMTP Control Group
7. SSH Control Group
8. Telnet ControlGroup
9. HTTP ControlGroup
0. Return to previous menu
Please Enter Your Choice => 0
Figure 9-7 Network Control Group Menu
9.2.2.2 SNMP Control Group
Main Menu  (1) RemotEye 4 Card Settings  (2) Network Control Group  (6) SNMP Control Group (See
Figure 9-7)
The SNMP Control Group provides access to the SNPM settings listed below.
1. SNMP Control : Enables/Disables SNMPv3 security. (Default: Enabled)
2. SNMP Port: Enter SNMP port number. (Default: 161)
1. Return to previous menu
Please Enter Your Choice => 0Press the number of the associated selection and press [Enter].
+===================================================================+
| Toshiba RemotEye 4 Configuration Utility |
| [SNMP Control Group] |
+===================================================================+
1. SNMP Control : Enabled
2. SNMP Port : 161
0. Return to previous menu
Please Enter Your Choice => 0
Figure 9-8 SNMP Control Group
9.2.2.3 SMTP Control Group
Main Menu  (1) RemotEye 4 Card Settings  (2) Network Control Group  (6) SMTP Control Group (See
Figure 9-7)
The SMTP Control Group provides access to the SNPM settings listed below.
1. SMTP Control: Enables/Disables SMTP. (Default: Enabled)
2. SMTP Port: SMTP port number. (Default: 25)
0. Return to previous menu