78 RemotEye 4 User Manual – 90988-007
Security: The security level provides the following 3 options:
1. noAuthNoPriv – with no authentication and no privacy passwords
2. authNoPriv – with authentication password but no privacy password
3. authPriv – with authentication password and with privacy password
Authentication format: The authentication format provides the following options:
1. HMAC-MD5
2. HMAC-SHA
Status Type: The status shows the authentication status “ready” or “not being used".
1. Display one entry
2. Modify one entry
1. Return to previous menu
Press the number of the associated selection and press [Enter].
+===================================================================+
| Toshiba RemotEye 4 Configuration Utility |
| [SNMPv3 USM Table] |
+===================================================================+
| User Name Auth Password Auth. Priv Password Privacy Security |
+-------------------------------------------------------------------+
[1] MD5 DES noAuthNoPriv
[2] MD5 DES noAuthNoPriv
[3] MD5 DES noAuthNoPriv
[4] MD5 DES noAuthNoPriv
[5] MD5 DES noAuthNoPriv
[6] MD5 DES noAuthNoPriv
[7] MD5 DES noAuthNoPriv
[8] MD5 DES noAuthNoPriv
Command :
1. Display one entry
2. Modify one entry
0. Return to previous menu
Please Enter Your Choice => 0
Figure 9-21 SNMPv3 USM Table
9.2.6 Modbus Group
Main Menu
(1) RemotEye 4 Card Settings
(6) Modbus Group (See Figure 9-22)
1. Node ID: 1
2. Modbus TCP/IP: Enabled/Disable
3. Port Number: 502
4. Modbus RTU: Enabled/Disabled
5. Baud Rate: 9600/19200/38400/57600/115200
6. Address: 1
0. Return to previous menu