Toshiba RemotEye 4 - Test Records (T1000 & 1600 Xp;Xpi Only); Backup Records Page

RemotEye 4 User Manual – 90988-007 83
TEST RECORDS (T1000 & 1600XP/XPI ONLY)
This table lists the detail history of test that has occurred on the UPS. The Log can store a maximum of 680 records.
If more events are recorded, the new record replaces the oldest record.
 Log Date – This field shows the date of the recording.
 Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss
24-hour format (i.e., 8:30 p.m. is 20:30:00).
 Record Number - Maximum number of records is 255.
 System Input Type
 System Output Type
 Input Voltage (%)
 Output Voltage (%)
 Output Load (%)
 DC Input Voltage (%)
 Battery Voltage
 Test Type
 RSV
 PASS
 Trigger Source
BACKUP RECORDS PAGE
This table lists the detail history of backup that has occurred on the UPS. The Log can store a maximum of 680
records. If more events are recorded, the new record replaces the oldest record.
T1000 & 1600XP/XPi Backup Record Log Format
 Log Date – This field shows the date of the recording.
 Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
 Record Number - Maximum number of records is 255.
 System Input Type
 System Output Type
 Input Voltage (%)
 Output Voltage (%)
 Output Load (%)
 DC Input Voltage (%)
 Battery Voltage start (%)
 Battery Voltage end (%)
 Trigger Source
 Backup Duration
4300 Backup Record Log Format
 Log Date – This field shows the date of the recording.
 Log Time - This field shows the time for backup record. Time is displayed in the hh:mm:ss 24-hour format
(i.e., 8:30 p.m. is 20:30:00).
 Record Number - Maximum number of records is 255.
 VBAT End – Battery Voltage recorded at the end of the event.
 Factor – Description of the event that occurred.
 Backup Time (Sec) – The amount of the time the UPS remaed in battery backup.