RemotEye 4 User Manual – 90988-007 93
10. Connect to vMA using WinSCP software to transfer the RemotEye Client shutdown software.
Open WinSCP and select either SFTP or SCP for the file protocol, and enter the vMA IP address/Host
Name, User name, and Password. (Example: Host Name - 10.2.0.11.) Then click the Login button.
(See Figure 11-5)
Figure 11-5 WinSCP Login Screen
10.1. Locate SD_ESXi_TSB_V100.tar file (left side), then select the directory where you want it stored on the
vMA (right side) and press the F5 key. (See Figure 11-6)
To Next Page
Loading...
