Toshiba RemotEye II - Remoteye II;External Hardware Specification

RemotEye II User Manual – 50024-014 115
RemotEye II/External Hardware Specification
CPU
16 bits CPU -100MHZ
Memory
2MB (1Mbit x16) TFBGA Flash ROM,
2MB (1Mbit x16) SDRAM
Network Controller
10/100 Mbits Ethernet Controller
Network Connection
RJ-45 Connector
Serial Communication
Two Asynchronous Serial Ports
Serial Connection
One RJ45 Connector to Network
One Golden Figure to UPS
RTC
Battery Backup RTC
DIP Switch
Two Dip-switch for configuration
SW1 SW2
OFF OFF = Normal
ON OFF = Firmware Upgrade
OFF ON = Debug Mode
ON ON = MFG Mode
LED
Power (Green)
Status (Amber)
LAN 10 Link/Activity (Amber)
LAN 100 Link/Activity (Green)
Jumpers
Clear Password
Reset Button
Reset System
UPS Protocol
Toshiba UPS Communication Protocol
Network Protocol
SNMP over UDP/IP
HTTP over TCP/IP
ARP,RARP,TFTP and ICMP
Supported MIB
MIB_II
TOSHIBA V2.50 MIB
RFC 1628 MIB
Operating Temperature
0 ~ 40° C
Operating Humidity
10 ~ 80 %
Power Input
+7V ~ 16VDC
Power Consumption
3.0 Watts Maximum
+7V DC 1.11 Watts
+12V DC 1.26 Watts
Size
137mm x 87mm x 29mm (L x W x H)
Regulatory
FCC class A,UL,CUL,CE