122 RemotEye II User Manual – 50024-014
Figure 0-8 Connected Client Table in RemotEye III
17. Go back to VMware vSphere Client program and select the ESXi server IP address ->
Configuration -> Virtual Machine Startup/Shutdown -> Properties… to set up Client OSs (guests)
to shut down before the vSphere Management Assistant (vMA) as shown in Figure 0-9.
17.1. Make sure that the check box for Allow virtual machines to start and stop automatically
with the system is checked and the Shutdown Action is set to Guest Shutdown. (See
Figure 0-9)
Figure 0-9 vSphere Management Asistant Screen Shot
18. Install WMware Tools for the client OSs by going to Inventory -> Virtual Machine -> Guest ->
Install/Upgrade VMware Tools.
19. Enter UPS Shutdown Events in RemotEye. This designates those UPS Events whose occurrence
trigger the RemotEye to send the shutdown command to the ESXi server.
19.1. Open RemotEye II/III and click on UPS Agent > UPS Management > UPS Shutdown.
To Next Page
Loading...
