36 RemotEye II User Manual – 50024-014
Trap Receiver Table
Main Menu →(4) Trap Receiver Parameters (see Figure 15: Console Trap Receiver Table Description).
The Trap Receiver Table lists IP addresses of the administrative machines that have been assigned to
receive traps.
The configuration of the trap receivers shall be as follows:
IP Address: IP address of the NMS.
Community String: NMS community string.
Select Trap Type:
1. None
2. Toshiba Trap
3. JEMA Trap
4. RFC 1628 Trap
Description: Description of the NMS.
+====================================================================+
| IP Address Community String Trap-Type Description |
+====================================================================+
[1] 0.0.0.0 *
[2] 0.0.0.0 *
[3] 0.0.0.0 *
[4] 0.0.0.0 *
[5] 0.0.0.0 *
[6] 0.0.0.0 *
[7] 0.0.0.0 *
[8] 0.0.0.0 *
1. Modify - Modify an entry of table
2. Reset - Reset an entry to default from table
0. Return to previous menu
Please Enter Your Choice =>
Figure 15: Console Trap Receiver Table Description
To Next Page
Loading...
