72 RemotEye II User Manual – 50024-014
History
Clicking the History button at the top-left side of the RemotEye II home page, Figure 18: HTTP History
Data Screen on page 72 will open in a separate window. This screen displays the UPS history log as a
line graph. By default, all of the UPS parameters will be displayed on the same graph. The user may
select any combination of parameters to be displayed on the graph by clicking the check box beside a
parameter on the monitor screen and clicking the Refresh button.
Display Point — Displays the log interval on the graph.
Refresh — Click the Refresh button after changing any settings on the History page for the changes to
take effect.
Reload — Updates the History page and resets the right display margin.
Exit — Closes the History window.
Figure 18: HTTP History Data Screen
To Next Page
Loading...
