⎯ 99 ⎯
6 F 2 S 0 7 1 5
⑤ The selected waveform is overlaid to be displayed.
･ You can overlay a waveform by dragging the selected waveform while pressing【Ctrl】key as well.
･ The measurement locations and the element names of the overlaid analog elements are placed
horizontally to be displayed.
⑥ To cancel the overlaying the waveforms, click the waveforms that you want to cancel
and click [Edit], and then click [Select].
Then, on the [Edit] menu, click [Cancel Merging].
･ The overlaying of the selected waveforms is canceled.
1-23
To Next Page
Loading...