⎯ 102 ⎯
6 F 2 S 0 7 1 5
1.7 Saving Waveform Data
This section describes how to save waveform data.
《Note for Operation》
● After you edit the details of waveform, you can save the editing work by the procedure
described in this section.
● You use the procedure to make a copy of a waveform data or change the name or the
saving location of a waveform.
● You can not use the following characters for the name of waveform data.
＼ / : * ? " < > |
《Operating Procedure》
① On the [File] menu, click [Save As].
1-26
To Next Page
Loading...