⎯ 117 ⎯
6 F 2 S 0 7 1 5
■Selecting Phase Order
This part describes how to change the current phase order setting.
《Note for Operation》
● You select phase order setting you want, and then you can execute analysis.
● You can change the assignment of the channel number of the AC element for
selecting phase order.
《Operating Procedure》
① On the [Set] menu, click [Phase Rotation].
② Click the down arrow button that appears in the [voltage] and/or [current] box and click
the phase order you want.
･ When the phase order is not set, [not entry] will be displayed.
③ To change the assignment of the channel number of the AC element for selecting
phase order, select each channel number of the AC element in the [Phase Rotation]
box.
④ Click【OK】button.
･ The phase order is selected.
2-5
To Next Page
Loading...