⎯ 144 ⎯
6 F 2 S 0 7 1 5
2.6 Saving As COMTRADE Format
This section describes how to save the waveform data as COMTRADE format.
《Note for Operation》
● When the waveform data is saved as COMTRADE format, the 3 files of which
extensions are [.hdr], [.cfg] and [.dat] will be created.
● You can not use the following characters for the name of data.
＼ / : * ? " < > |
《Operating Procedure》
① On the [Analysis] menu, click [Save As ComTrade File Type].
② Type the name of the data in [File name] text box.
･ If you save the data in other drive or folder, click the down arrow that appears just to the right of [Save in]
drop-down list box and click the drive that includes the folder in which you want to save the data. Then,
click the folder in which you want save.
③ Click【Save】button.
･ The waveform data is saved as COMTRADE format.
2-32
To Next Page
Loading...