⎯ 145 ⎯
6 F 2 S 0 7 1 5
2.7 Saving Analysis Calculation Value
This section describes how to save the analysis calculation values.
《Note for Operation》
● You can edit the data with other software by saving the analysis calculation values by
the operation.
● The data are saved in CSV format.
● You can select the analysis calculation values of the phase order, AC 16ch, or the
specified channel to save them.
● You can select the primary values or the secondary values for the analysis calculation
values to be saved.
(→2.1 Setting Parameters for Measurement and Analysis ■Selecting Options)
● You can not use the following characters for the name of data.
＼ / : * ? " < > |
《Operating Procedure》
① On the [Analysis] menu, click [Save As CSV File Type].
2-33
To Next Page
Loading...