⎯ 2 ⎯
6 F 2 S 0 7 1 5
CONTENTS
1. Introduction 3
2. System Configuration 4
2.1 Minimum System Configuration 4
2.2 Access from a Local PC 5
2.3 Access via a protocol converter from a Remote PC 6
2.4 Access with a modem via telephone line 7
2.5 Access via Ethernet LAN 10
2.6 Access via G1IF4 Interface Unit 10
2.7 Structure of RSM100 Software 11
2.8 Menu Items 12
3. Installing RSM100 Software 13
4. Operation of PC Interface RSM100 17
4.1 Starting Up 17
4.2 Extracting, Displaying, Saving and Printing Relay Data 29
4.3 Operation of Record Menu 32
4.3.1 On-line Operation 32
4.3.2 Off-line Operation 40
4.4 Operation of Status Menu 41
4.4.1 Metering 41
4.4.2 Binary Input Status 42
4.4.3 Binary Output Status 43
4.4.4 Relay Element Status 43
4.4.5 Status of Time Synchronization Source 44
4.4.6 Count Status 45
4.4.7 Terminal Status 45
4.4.8 LED and Communication Status 46
4.5 Operation of Setting Menu 47
4.5.1 On-line Operation 47
4.5.2 Off-line Operation 61
4.6 Operation of Test Menu 64
Appendix A 69
Menu Tree 69
Appendix B Waveform data analysis instruction manual 71
Appendix C Setting Method of RSM100 Setting Data 159
Appendix D Q & A 163
The data given in this manual are subject to change without notice. (Ver. 8.3)
To Next Page
Loading...