⎯ 40 ⎯
6 F 2 S 0 7 1 5
4.3.2 Off-line Operation
Click the [Record] button on the [Top menu] screen, then the file [Open] screen will appear.
Choose a file and open it, then the record screens will appear. (The record screens depend on the
relay model.)
The following operations are the same as those described for on-line operation.
Note: When the saved Waveform data (*.osc) is displayed off-line, run “RSM100 Waveform
Analysis” directly. (Refer to “3. Installing RSM100 Software”.
To Next Page
Loading...