Toshiba RSM 100 - Zooming in and out Waveform

⎯ 90 ⎯
6 F 2 S 0 7 1 5
1.3 Zooming In and Out Waveform
This section describes how to zoom in and out the displayed waveforms.
《Note for Operation》
● The following operations are available.
・Zoom In Designated Range You can zoom in the designated range.
・Fit to Window You can display the waveforms from the beginning
to the end in a screen.
・Zoom In, Out Time Axis You can zoom in(×2) and out(× 1/2) the time
axis.
・Zoom In, Out Amplitude You can zoom in(×2) and out(× 1/2) the
amplitude of waveforms.
・Normal You can adjust the time axis and the amplitudes to
the following statuses.
Time axis A sample of waveform matches
with 1 dot of the screen.
Amplitude When the vertical resolution of
screen is 768 dots, all the
elements are displayed.
・With Interval Fixed You can zoom in(×2) and out(× 1/2) only
selected waveforms.
《Operating Procedure》
① To zoom in the designated range, click [View], and then click [Zoom In Designated
Range].
1-14