⎯ 98 ⎯
6 F 2 S 0 7 1 5
■Overlaying Waveform
This part describes how to overlay a waveform of analog element on other waveform to display
them.
《Operating Procedure》
① Click the element segment of the waveform on which you want overlay other
waveform (only 1).
② On the [Edit] menu, click [Select].
③ Click the element segment of the waveform that you want to overlay.
④ On the [Edit] menu, click [Merge].
1-22
To Next Page
Loading...