4-8 110 Series
4.3 Optional PC Card
Removing an Optional PC Card
To remove an optional PC card, make sure the computer is in Boot mode. Then follow the
steps below and refer to Figure 4-4.
1. Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2. Remove the battery pack as described in Section 4.2.
3. Pull out the eject button; then press it (the top button for the top card and the
bottom button for the bottom card). The card will pop out slightly for removal.
Figure 4-4 Removing the PC card
To Next Page
Loading...
