3-8 110 Series
3.4 System Test
To execute the System Test, select 1 from the Diagnostic Test Menu, press Enter, and
follow the directions on the screen. Move the highlight bar to the subtest you want to ex-
ecute and press Enter.
Subtest 01 ROM Checksum
Tests the system board from address F0000h to FFFFFh (64 KB).
Subtest 02 Not used
Subtest 03 Not used
Subtest 04 Not used
Subtest 05 Thermistor Check
Checks the thermistor that controls CPU temperature. The thermistor cable
connects to PJ1 on the system board.
To Next Page
Loading...
