Toshiba Satellite 110 Series - Connecting and Setting up Your Modem

Connecting with the World
Setting Up
Part I: Getting To Know Your Computer
144
Connecting and Setting Up Your Modem
Once you’ve purchased your modem and taken it out of its box,
this section describes how to make it ready to use.
Installing a PC Card Modem
If you purchased a PC Card modem, follow these steps:
1 Locate the PC Card slot on the left side of the computer.
The PC Card slot
2 Unfold the
eject button
that corresponds to the socket you
wish to use and press it to eject the
PC Card socket protector
.
The top button corresponds to the upper socket, the bottom
button to the lower socket.
3 Grasp the edges of the socket protector and slide it out of
the slot.
Set the protector aside so you can reinsert it after you remove
the PC Card.
Inserting a Type II PC Card into the PC Card slot
4 Insert the
PC Card
.
If you have a Type III card, insert it into the lower socket. If
you have a Type I or Type II card, insert it into either socket.
Eject buttons
PC Card socket protectors
PC Card