Toshiba Satellite 110 Series - Connecting the Computer to the Notedock

Using Your Computer on Your Desk
Using the Optional NoteDock™
Part I: Getting To Know Your Computer
178
❖
the
power connector
that provides power to the computer
when you connect the NoteDock to a power source.
❖
the
guide pins
that help align the computer with the Note-
Dock, ensuring a proper connection.
Connecting the Computer to the NoteDock
To attach the computer to the NoteDock, follow these steps:
1 Turn the computer off.
2 Remove all cables from the back of the computer.
Attaching the computer to the NoteDock
3Lift the
locking latch
on the NoteDock.
4 Align the two holes on the bottom of the computer with the
guide pins
on the NoteDock.
5 Gently press the
locking latch
down.
The computer slides into place and connects to the NoteDock.
6 Attach the power cord to the NoteDock’s power socket.
7 Connect the power cord to a wall socket.
To disconnect the computer from the NoteDock, turn the com-
puter’s power off, lift the locking latch and remove the computer.
Locking latch
Guide pin