If Something Goes Wrong…
Fixing Device Related Problems
Part I: Getting To Know Your Computer
252
Or the cap may have become worn. Replace the cap with one of
the spares that came with your computer. Follow these steps:
1 Remove the AccuPoint cap by grasping it firmly and
pulling it straight up.
The AccuPoint spindle is now visible.
2 Position the new cap on the spindle and press it into place.
The Display
Here are some typical display problems and their solutions:
The display is blank.
Display Auto Off may have gone into effect. Press any key to acti-
vate the screen.
You may have activated the instant security feature by pressing
Fn
+ F1
. Enter your password if you have registered one, or press
Enter
to return to work.
The display doesn’t look right.
See “Changing the Display Mode” on page 215 to adjust your
screen resolution or color settings.
The built-in screen flickers.
Some flickering is a normal result of the way the screen produces
colors. To reduce the amount of flickering, try using fewer colors.
Windows 95 displays a message that there is a problem with your
display settings and that the adapter type is incorrect or the cur-
rent settings don’t work with your hardware.
Reduce the size of the color palette to one that is supported by the
computer’s internal display. See “Changing the Display Mode” on
page 215 for instructions.
To Next Page
Loading...
