MaxTime
The Set Battery Charge Dialog Box
Part II: Technical Reference
282
Alarm Options
The Alarms dialog box lets you set the following option:
For more information about setting the battery alarms, refer to
“Setting the Alarms” on page 116.
The Set Battery Charge Dialog Box
To open the Set Battery Charge dialog box, choose Set Battery
Charge from the MaxTime Options menu. You may only choose
this option when the battery charge is unknown to the system.
This dialog box allows you to estimate the battery charge.
Buttons
The following table summarizes the buttons on the Set Battery
Charge dialog box:
Option Settings Usage
Percent Remaining
Threshold
xx
% (where
xx
is a per-
centage you set)
allows you to set the
trigger point for the bat-
tery alarm.
Button Function
OK saves current settings and exits the dialog box.
Cancel cancels current settings and exits the dialog box.
Help accesses online help.
To Next Page
Loading...
