Hardware Setup
The Hardware Configuration Options Dialog Box
Part II: Technical Reference
297
The Legend Field
Each page of hardware configuration options has a Legend field.
This field displays information to help you choose option settings.
For example, when you choose the Parallel/Printer, the Legend
field displays the following message: “The parallel port options
facilitate the selection of the parallel port address and printer port
type.”
Buttons
The following table summarizes the buttons on the Hardware
Configuration Options dialog box:
Button Function
OK accepts your changes and exits the dialog box.
Cancel ignores the changes you made and exits the dialog
box.
Help accesses online help.
Default returns all options to their default settings. To
make the defaults permanent, you must click OK.
Reset returns all options to the settings in effect when
you opened the dialog box.
Reboot immediately restarts the computer. This button is
available only if you change an option that
requires a restart.
To Next Page
Loading...
