TSETUP
OTHERS
Part II: Technical Reference
314
OTHERS
This group allows you to set many other configuration options.
Whether or not you need to use these options depends primarily
on the software and devices you use.
If you set the Parallel Port to LPT1, LPT2, or LPT3, a drop-
down list box appears, allowing you to set the Printer Port Type
option.
Printer Port
Type
ECP
Standard Bi-
directional
ECP is the setting to use
for most printers and any
other ECP-supported
devices. Set this to Bi-
directional only if the doc-
umentation for your paral-
lel device instructs you to
do so.
Y
Option Settings Usage Restart
Power-up Mode Resume
Boot (default)
alternates between
Resume Mode and Boot
Mode.
N
CPU Cache Enabled
(default)
Disabled
improves system perfor-
mance. Disable this option
only if your software or
optional devices require
you to do so.
Y
If you set the CPU Cache option to Enabled, a drop-down box
lets you set the Write Policy option.
Option Settings Usage Restart
To Next Page
Loading...
