Let's Start at the Very Beginning…
Turn the Computer On
Part I: Getting To Know Your Computer
25
Turn the Computer On
Finally, the preparation is over. It’s time to turn the computer on
and get to work. To turn the computer on, follow these steps:
1 Make sure there’s no diskette in the diskette drive.
2 If you have a printer connected to your computer, turn the
printer on and wait until the printer is ready (on line).
3 Locate the power/speed light on the indicator panel.
Turning the power on
4 Press and hold the
power button
on the left side of the com-
puter until the power/speed light turns on (about one
second).
When you turn the computer on the first time, do not turn the
power off again until the operating system loads completely.
The next section explains how to choose the operating
system.
On
Power button
To Next Page
Loading...
