106
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
Enabling the Hibernation command
Hibernation enabled is a default setting. If it should become
disabled, you can enable it as follows:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Performance and Maintenance.
3 Double-click the Toshiba Pow e r Saver icon.
The TOSHIBA Power Saver Properties window appears.
You can also access the TOSHIBA Power Saver Properties
window by using the TOSHIBA Console button. See
“TOSHIBA Console” on page 192 or “Power Management”
on page 194.
Sample TOSHIBA Power Saver Properties window
To Next Page
Loading...
