108
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
Sample Hibernate computer window
2 Select Hibernate from the drop-down list of options.
3 Click OK.
The computer saves the state of the system, including all open
programs and files, to the hard disk. Then the computer turns
itself off.
Going into Hibernation mode more quickly
You can also put the computer into Hibernation mode in three
ways:
❖ By pressing the power button
❖ By closing the display panel
❖ By pressing the hotkey combination Fn + F4
To put the computer into Hibernation mode by pressing the
power button and/or closing the display, you must preset the
mode:
1 Click Start, Control Panel.
The Control Panel window appears.
2 Click Performance and Maintenance.
To Next Page
Loading...
