112
Learning the Basics
Using Standby
5.375 x 8.375 ver 2.4.0
Using Standby
If you are using the Windows
®
XP Home operating system,
or are using the Windows
®
XP Pro operating system and are
not a member of a domain, power off the computer using the
Standby command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window
2 Click Stand By.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light ( ) blinks amber indicating the
machine is in Standby mode.
If you are using the Windows
®
XP Pro operating system and
are a member of a domain, power off the computer using the
Standby command as follows:
1 Click Start, then Shut down.
The Shut Down window appears.
To Next Page
Loading...
