128
Mobile Computing
Changing the main battery
5.375 x 8.375 ver 2.4.0
Removing the battery from the battery cover
3 Lift the battery from the battery cover.
Inserting a charged battery
1 Turn off the computer.
See “Turn Off or Shut down command” on page 99.
2 Remove the battery.
See “Removing the battery from the computer” on
page 126.
3 Release the battery from the battery cover.
See “Removing the battery from the battery cover” on
page 127.
4 Wipe the battery terminals of the charged battery with a
clean cloth to ensure a good connection.
5 Hold the charged battery so that the label is face down.
6 Fit the battery in the battery cover, ensuring the battery
connectors are exposed. Make sure the battery is secured
by the battery cover latches.
7 Find the four side tabs on the battery cover and line them
up with the corresponding recessed areas along the sides
of the empty battery slot. When the tabs line up with the
Battery cover latch
Battery cover
latch
Tab
Tab
To Next Page
Loading...
