71
Getting Started
Setting up the fax function
5.375 x 8.375 ver 2.4.0
2 Click the Set up faxing option.
3 Follow the on-screen instructions.
The fax function default setting is enabled. If it is disabled,
enable the fax function by doing the following:
1 Click Start, Printers and Faxes.
2 Right-click the fax icon.
3 Click Properties from the drop-down menu.
4 Click the Devices tab.
5 Click Properties.
6 Click the Receive tab.
7 Click Enable device to receive.
To disable the auto-receive function, repeat steps 1-4. But,
under the device name, right-click Toshiba Soft Modem
AMR, select Receive and then select Disable.
To Next Page
Loading...
