Using Your Computer on Your Desk
Using a Serial Mouse
218
Using a Serial Mouse
You may want to use a mouse instead of the AccuPoint. You can
use a serial mouse or a PS/2 mouse. See “Using a PS/2 Mouse” on
page 220 if you wish to use a PS/2 mouse.
Connecting the Mouse
To connect a serial mouse, follow these steps:
1 Turn the computer off.
Opening the port cover
2 Open the port cover on the left side of the computer.
Connecting the cable to the serial port
3 Plug th
e
mouse cable
into the computer’s
serial port
.
4 Turn the computer on.
Port cover
Cable Serial port
To Next Page
Loading...
