MaxTime
The Machine Settings Dialog Box
322
Option: CPU Sleep Mode
Settings:
Enabled (Low Power default)
or
Disabled (Full Power default)
Usage:
If enabled, temporarily shuts down the processor when there are
no processing requests, such as keyboard input or pointing device
movement. For more information, see “CPU Sleep Mode” on
page 141.
Option: Display Auto Off
Settings:
Time periods of 1, 3 (Low Power default), 5, 10, 15, 20 and 30
minutes
or
Disabled (Full Power default)
Usage:
Turns the display off if it is not used for the time selected. For
more information, see “Display Auto Off” on page 141.
Option: HDD Auto Off
Settings:
Time periods of 1, 3 (Low Power default), 5, 10, 15, and 20 min-
utes
or
a 30-minute period (Full Power default).
Usage:
Turns the hard disk drive off if it is not used for the time selected.
For more information, see “HDD Auto Off” on page 141.
Option: System Auto Off
Settings:
Time periods of 10, 20, 30, 40, 50, and 60 minutes
or
Disabled
(default)
Usage:
Turns the system off if you haven't used the computer for the time
selected. For more information, see “System Auto Off” on
page 142.
Option: LCD Brightness
Settings:
Bright (Full Power default)
or
Semi-Bright (Low Power default)
Usage:
Sets the brightness of the display. For more information, see “LCD
Brightness” on page 142.
To Next Page
Loading...
