8-8 Optional Devices User's Manual
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
8.
Start the Hardware Setup program.
9.
Select the
Parallel/Printer
tab from the
Hardware Setup
window.
10.
Set the printer port type to
ECP
and press
OK
11.
Choose
Reboot
for the change to take effect.
12.
Select the printer in Windows Add Printer Wizard. To access the
Add
Printer Wizard
utility, click
Start
, point to
Settings
, click
Printers
and double-click the
Add Printer
icon.
External monitor
An external analogue monitor can be connected to the external monitor
port on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
1.
Turn the computer off.
2.
Connect the monitor to the external monitor port.
3.
Turn the monitor’s power on.
4.
Turn the computer on.
When you turn on the power, the computer automatically recognises the
monitor and determines whether it is colour or monochrome.
You can use the Hardware Setup or TSETUP program to select between
Auto-Selected
and
Simultaneous
displays. Refer to Chapter 7,
Setup
and Password Security
, for details on settings.
If you have selected
Simultaneous
under the
Display
options of the
Hardware Setup or TSETUP program, both the external monitor and the
internal LCD will be active when you turn on the computer. If
Auto-
Selected
is selected, only the external monitor will be active.
To change the display settings, press
Fn + F5
. If you disconnect the
monitor before you turn the computer off, be sure to press
Fn + F5
to
switch to the internal display. Refer to Chapter 5,
The Keyboard
, for details
on using hot keys to change the display setting.
To Next Page
Loading...
