User's Manual ASCII Character Codes G-1
Version
1
Last Saved on 19/01/00 17:28
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
Appendix G
ASCII Character Codes
This appendix shows the American Standard Code for Information
Interchange (ASCII) on the following pages. The characters in the
IBM
char
column appear on your display when you type the corresponding
ASCII code (as described in Chapter 5,
The Keyboard
). The characters
that are printed, however, depend on the software you are using. For most
software, the printed output for decimal codes 32 to 128 will match your
screen display.
To Next Page
Loading...
