6-14 Power and Power-Up Modes User's Manual
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
Panel power off
You can set up your computer (Windows 98 only) so that power turns off
automatically when you close the display panel.
When you open the panel, power turns on in Standby mode or Hibernation
mode, but not in boot mode.
If the panel power off function is enabled and you use Stand by in the
Windows Shut down menu , do not close the display until the Stand by or
Hibernation function is completed.
System Auto Off
This feature turns the system off automatically if it is not used for a set
duration. The system shuts down in Stand by mode.
Auto power on
This feature lets you set a time for the system to turn on automatically. Use
Scheduled Tasks
in Windows 98.
To Next Page
Loading...
