7-4 Setup and Password Security User's Manual
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
First page of TSETUP
Memory
This group displays the system’s total memory.
Password
This option allows you to set or reset the user password for power on and
instant security.
Registered
The user password has been registered.
Not Registered
The user password has not been registered.
If the supervisor password has been registered, it must be entered to
access this and other TSETUP functions as well as Hardware Setup.
For details on setting the password, refer to the Password security section
later in this chapter.
Battery
These options let you set battery save functions for optimum performance
or battery power conservation.
Battery Save Mode
This option is used to select
Full Power
,
Low Power
or
User
Setting
of the
BATTERY SAVE OPTIONS
.
These settings are for the MS-DOS environment only. When you use
Windows, settings made in Power Saver will be used.
To Next Page
Loading...
