User's Manual Setup and Password Security 7-11
Version
1
Last Saved on 19/01/00 17:28
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
When the Parallel Port Mode (see settings below) is set to ECP, the DMA
channel can also be set to 1 or 3. The default is 3.
LPT setting I/O address Interrupt level DMA Channel
LPT 1 378H 7 3
(Default)
LPT 2 278H 5 3
LPT 3 3BCH 7 3
Not Used
(Disables port)
Others
(Other settings made automatically by
plug-and-play operating systems)
PCI bus
It is for information only and cannot be changed. It appears only
in TSETUP.
PCI BUS = IRQ11
PC Card
This option lets you set the PC Card Controller mode. Refer to Hardware
Setup for details.
Drives I/O
This item displays the installed hard disk drives and DVD-ROM drives:
HDD, CD-ROM. It appears only in TSETUP.
Settings for Hard Disk Drive
HDD
=
Primary IDE (1F0H/IRQ14)
(HDD ready for use)
Settings for CD/DVD-ROM drive
CD-ROM
=
Secondary IDE (170H/IRQ15)
(CD/DVD-ROM ready for use)
Floppy disk I/O
This item displays the address, interrupt level and channel settings for the
diskette drive. It appears only in TSETUP.
Floppy Disk = (3F2H/IRQ6/CH2)
To Next Page
Loading...
